BlueSky Designs Mount'n Mover, Руководство пользователя

Страница: 29 / 50

Set up for IR Remote Control Access for the I-13 and I-16
IR Remote Control
Access Window
QRP
(Offset to the right or left of the IR window)
*
(DP-T5 + DP-EXT)
List of Parts
1
x4
(8-32 x 2”)
DP-EXT
DP-1x2
QCR
Parts needed are the DP-T5, the DP-EXT (Extension Plate),and
the Quick Release Plate QRP (included with the Mount’n Mover)
Place DP-1x2 over QCR
2
Place the DP-1x2 over the
Quick Connect Receiver. Note
the counter sunk holes are at
the top and the red flag is on
the left
Two Counter sunk holes
Red Flag
Attach DP-EXT to DP-1x2 and QCR
3
Place DP-EXT over the DP-1x2 and use the four screws
to attach all three parts together. Note the countersunk
holes on the DP-EXT are facing up.
(8-32 x 2”)
x4 screws
Counter sunk holes
Attach QRP to DP-EXT
4
Place the Quick Release Plate (QRP) over the DP-EXT
and attach to the threaded inserts in the EXT with four
(8-32 x 1/4”) screws (labeled QRP to Device Plate)
(8-32 x 1/4”)
x4 screws
QRP
DP-EXT
assembled
extension
5
Mount to the Tobii Device
Slide the Extension up onto the
connecting grooves on the Tobii
plate until it “clicks” in place
Slide
Up
DP-EXT
DP-1x2
29