Rev 220301 003
20
OPERATING MANUAL
EN
Place the piston pump on the
YeastForce
until
the piston clicks into place.
Then,
confirm
this
in
the
program:
[OK
– Piston connected]
Figure 41
Wait about 10 seconds.
If the pressure is constant and the program
prompts you to do so, press the piston rod into the
piston slowly and consistently.
Figure 42
After the valve closes (audible soft click and the
message [Remove Piston]), the piston can be re-
moved and the filter can be put on.
Figure 43
The
pressure
rises
in
the
YeastForce
.
The program records the pressure and calculates
the tightness and volume of the system.
The lower graph shows a partial section of the up-
per graph.
This automatically displays the relevant part of the
measurement with more details.
Figure 44
