background image

Always keep this instruction manual together with the tool and ensure that 

they are handed over together to any other operator. 

General information

Explanation of Terminology

WARNING

The word WARNING is used to 
emphasize a 

potentially

dangerous situation which could 
lead to severe personal injury or 
death.

CAUTION

The word CAUTION is used to 
emphasize a 

potentially dangerous 

situation which could lead to minor 
personal injury or damage to the 
equipment or other property.

Graphic Symbols

GENERAL INFORMATION

DANGER! TO AVOID SERIOUS INJURY OR DEATH:

NEVER PLACE YOUR HAND AT THE END OF THE FASTENER GUIDE OF THE BP-303A 
TOOL. OPERATORS AND BYSTANDERS AROUND THE TOOL BEING USED MUST USE EYE 
AND EAR PROTECTION. ALWAYS ASSUME THAT THE TOOL IS LOADED WITH A LOAD. 
NEVER PLACE YOUR FINGERS ON THE TRIGGER OF THE LOADED OR UNLOADED TOOL 
UNTIL THE TOOL FASTENER GUIDE IS AGAINST THE WORK BASE AND YOU ARE READY 
TO DO A FASTENING. IF THE TOOL ACCIDENTALLY SHOOTS HIS/HER HAND OR ANY 
PART OF THE BODY, THE PISTON CAN ENTER THE BODY AND CAUSE SERIOUS INJURY 
OR DEATH. IT IS VERY IMPORTANT THAT THE OPERATOR OF THIS BP-303A TOOL 
READS AND UNDER STANDS THE ENTIRE MANUAL AND COMPLETES THE OPERATORS 
EXAM WITH A 100% GRADE. THE WARRANTY DOES NOT APPLY UNTIL BLUEPOINT 
FASTENERS RECEIVES A COPY OF OPERATORS EXAM AND A COPY OF YOUR RECEIPT 
WHEN THE TOOL WAS PURCHASED.

General Warning

Read Instructions Before 

Use

Use Safety Helmet

Use Eye Protection

Use Ear Protection

WARNING! Hot Surface

03

PRIOR TO OPERATING THE BP-303A TOOL, PLEASE STUDY THIS MANUAL CAREFULLY 
AND DEVELOP A THOROUGH UNDERSTANDING OF THE CONTENTS. PROPER 
TRAINING ACCORDING TO THE CURRENT ANSI STANDAR D A 10.3, SAFETY 
REQUIREMENTS FOR POWDER ACTUATED FASTENING SYSTEMS MUST BE 
COMPLETED AND A BLUEPOINT FASTENERS QUALIFIED OPERATOR CARD MUST BE 
OBTAINED PRIOR TO OPERATION OF THE TOOL. STATE, LOCAL, OR OTHER 
REGULATIONS SHOULD ALSO BE FOLLOWED. LAWS, REGUATIONS, AND STANDARDS 
REGARDING THE USE OF POWDER ACTUATED TOOLS MAY PERIODICALLY BE REVISED 
WITHOUT NOTICE. ANY SUCH REVISIONS MAY CHANGE THE SAFETY AND OPERATING 
PROCEDURES DESCRIBED IN THIS MANUAL. BLUEPOINT FASTENERS IS NOT 
RESPONSIBLE FOR ANY SUCH REVISIONS WHICH OCCUR AFTER PUBLICATION OF THIS 
MANUAL. IT IS THE RESPONSIBILITY OF THE USER TO MAINTAIN ALL KNOWLEDGE OF 
THE LAWS, REGULATIONS, AND STANDARDS THAT APPLY TO POWDER ACTUATED 
TOOLS.

WARNING!

BP-303A TOOL IS TO BE USED ONLY BY LICENSED OPERATORS. YOU MUST HAVE 

A LICENSE BEFORE OPERATING IT. YOU MAY COMPLETE THE ENCLOSED EXAM 

SUCCESSFULLY AND RETURN IT TO GET A TOOL OPERATOR’S CARD THAT WILL 

BE ISSUED TO YOU, AND ALSO ACTIVATE YOUR WARRANTY.  OPERATOR’S 

LICENSE CAN ALSO BE OBTAINED DIRECTLY AT: www.bpfasteners.com

WARRANTY

Bluepoint warranty assures that the 

supplied 

tool is free of defects in workmanship 

or material. Validity of this warranty is applied as long as the tool is handled and 

operated correctly, serviced and cleaned properly in accordance with the Bluepoint 

Instruction Manual and only if original Bluepoint components, consumables and 

spare parts or other equivalent quality products are used. Parts requiring 

replacement or repairs as a result of normal wear and tear are not covered under this 

warranty.   

All warranties or products described herein, expressed or implied, including the 
warranties of merchantability or fitness for a particular purpose, are specifically 

excluded, with the following exceptions: Bluepoint Fasteners will repair or replace, at 
its option, any tool, part or element holding that, within 90 days after the sale, only if 

Bluepoint is found to be responsible for a defective part in material or workmanship, 

excluding normal wear.

All additional claims are excluded, specifically, Bluepoint is not obligated for direct, 

indirect, incidental or consequential damages, losses or expenses in connection with, 

or by reason of, the use of, or inability to use the tool for any purpose.

THIS IS THE ONLY WARRANTY AND REMEDY BLUEPOINT HAS AVAILABLE AND 

IS IN NO EVENT LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL OR 

CONSEQUENTIAL DAMAGES, OR ANY OTHER DAMAGES.

02

Содержание BP-303A














Отзывы: