BluePoint Fasteners BP-303A, Инструкция по эксплуатации

Страница: 10 / 13

1. Reassemble the tool in the reverse
order of disassembly. When sliding
the front barrel onto the piston
sleeve, align the groove in the
piston sleeve with the groove in the
front barrel.
HOW TO REASSEMBLE THE TOOL
2. Align the groove in the piston
sleeve with the pawl opening in the
tool body when placing the barrel
assembly into the tool body.
Replace the pawl and install the
annular spring.
ALIGN THE FRONT AND REAR
BARREL GROOVES
ALIGN THE BARREL ASSEMBLY
GROOVE WITH THE PAWL OPENING
ALWAYS PERFORM THE
DAILY FUNCTION TEST
BEFORE USING THE TOOL
AFTER CLEANING OR
SERVICING
18
BP-303A
Item # PART # DESCRIPTION Item # PART # DESCRIPTION
1 BP303A-01 Nosepiece Extension Cap 16 BP303A-16 Press Spring
2 BP303A-02 U-Shear Clip 17 BP303A-17 Push Pin
3 BP303A-03 Nosepiece Extension 18 BP303A-18 Bolt (M4 x 8) w/washer (3pcs each)
4 BP303A-04 Piston 19 BP303A-19 Adjuster Cover
5 BP303A-05 Barrel 20 BP303A-20 Adjuster
6 BP303A-06 Bolt (M6 x 8) 2pcs 21 BP303A-21 Threaded Pin
7 BP303A-07 Stop (Pawl) 22 BP303A-22 Sear Holder
8 BP303A-08 Annular Spring 23 BP303A-23 Sear Spring
9 BP303A-09 Ball (Dia. 6mm) 24 BP303A-24 Sear
10 BP303A-10 Liner 25 BP303A-25 Firing Pin
11 BP303A-11 Ball (Dia. 5mm) 26 BP303A-26 Firing Pin Spring
12 BP303A-12 Magazine Catch Spring (2pcs) 27 BP303A-27 Sear Holder Return Spring
13 BP303A-13 Tool Body 28 BP303A-28 Cover Cap
14 BP303A-14 Push Pin (Trigger Roll Pin) 29 BP303A-29 Handle Grip
15 BP303A-15 Trigger Assembly
19