BluePoint Fasteners BP-301C, Инструкция по эксплуатации

Страница: 4 / 13

SAFE HANDLING OF TOOLS
1. Always make sure that the tool is
working properly before use.
Follow the Daily Function Test.
2. Always use certified BLUE POINT
loads from a box indicating the
type of load, power and number.
Never attempt to use unknown
power loads.
3. Never carry loads in pockets with
loose pins or other objects.
Doing
so may cause the load to fire.
4. Never load a tool unless you
intend to use it immediately.
Unattended loaded tool in the
workplace may result in its
accidental discharge by others.
5. Never place your hands or any
other body part on the loading
end of the tool.
It can cause serious
injury by the fastener or piston if
the tool is fired accidently.
7. Never point the tool at yourself or
others.
8. Never carry a loaded tool around
the work area.
9. Never play around with the tool.
10. Using or cleaning tools, or
handling loads in poorly ventilated
areas may result in exposure to
lead and other substances known
to cause birth defects and physical
changes. Ensure adequate
ventilation at all times and wash
thoroughly after exposure.
6. Always unload the tool and store
it along with the loads safely
locked in a tool box.
Keep the keys
away from children and
unauthorized persons.
07
SAFETY PRECAUTION
Tool operators and bystanders
must wear ear and eye protection.
Read the manual thoroughly before
operating the tool.
Never keep a hand over fastener
loading end of the tool. A serious
hand injury may occur from
penetration by the piston or a
discharged fastener.
06
•
Always check the tool first to ensure
that it does not contain a strip or
fastener.
•
Try the tool repeatedly pressing the
muzzle bushing completely on a
hard surface and by pulling the
trigger. You should hear an audible
clicking sound while when the
trigger is pulled. Let up on the tool
and make sure the barrel is open to
semi-open position.
DAILY FUNCTION TEST