BluePoint Fasteners BP-301C, Инструкция по эксплуатации

Страница: 10 / 13

1. Reassemble the tool in the reverse
order of disassembly. When sliding
the front barrel onto the piston
sleeve, align the groove in the
piston sleeve with the groove in the
front barrel.
HOW TO REASSEMBLE THE TOOL
2. Align the groove in the piston
sleeve with the pawl opening in the
tool body when placing the barrel
assembly into the tool body.
Replace the pawl and install the
annular spring.
ALIGN THE FRONT AND REAR
BARREL GROOVES
ALIGN THE BARREL ASSEMBLY
GROOVE WITH THE PAWL OPENING
ALWAYS PERFORM THE
DAILY FUNCTION TEST
BEFORE USING THE TOOL
AFTER CLEANING OR
SERVICING
18 19
BP-301C
Item # PART # DESCRIPTION Item # PART # DESCRIPTION
1 BP301C-01 Guard 14 BP301C-14 Tool Body
2 BP301C-02 Nosepiece Extension Cap 15 BP301C-15 Push Pin (Trigger Roll Pin)
3 BP301C-03 U-Shear Clip 16 BP301C-16 Trigger Assembly
4 BP301C-04 Nosepiece Extension 17 BP301C-17 Threaded Pin
5 BP301C-05 Piston Assembly 18 BP301C-18 Sear Holder
6 BP301C-06 Barrel 19 BP301C-19 Sear Spring
7 BP301C-07 Bolt (M6 x 8) 2pcs 20 BP301C-20 Sear
8 BP301C-08 Stop (Pawl) 21 BP301C-21 Firing Pin
9 BP301C-09 Annular Spring 22 BP301C-22 Spring
10 BP301C-10 Ball (Dia. 6mm) 23 BP301C-23 Sear Holder Return Spring
11 BP301C-11 Liner 24 BP301C-24 Cover Cap
12 BP301C-12 Ball (Dia. 5mm) (2pcs) 25 BP301C-25 Handle Grip
13 BP301C-13 Magazine Catch Spring (2pcs)