Vario L3
BIOS Setup
Page | 25
Installing Operating Systems
Your VARIO L3 Small Form-Factor PC may have been supplied complete with a software operating system, in
which case the appropriate drivers will have been loaded.
If it has been supplied without an operating system, one must be loaded following the instructions supplied with
the software. It is then necessary to add driver programs for the specific hardware of the motherboard and any
additional expansion cards. The manner in which the drivers are loaded will vary depending upon the actual
operating system used. Details follow for Microsoft XP.
Microsoft XP
To install the drivers for Windows XP, you can either follow the guided install from the Blue Chip Technology
Support CD or manually install in order as follows.
To install, go to the following directories on the Support CD
780G Drivers Drivers\Vario L3\
785G Drivers Drivers\Vario L3 785\
780G
785G
Chipset
This should be run first, for example for the 780G
Chipset 1\setup.exe
This installs the On Board Chipset drivers for CPU, Memory, IDE etc as well as the Intel Graphics Media
Accelerator Driver. If HD Audio is required via the HDMI port, then this must first be enabled in BIOS. Refer
to the relevant
BIOS section
for details.
LAN
Again for the 780G, run Lan 2\setup.exe
Realtek Audio Drivers
For the 780G run Audio 3\win2kxp\setup.exe
This is the Audio drivers for the Line-In, Line-Out and MIC-In Audio ports
