BlueBox niji, Руководство пользователя

Страница: 12 / 31

11
www.BlueBoxOptics.com V2.4
niji
When the channel has been switched on, the “Off” button changes to “On” and the
column of colour will change from dark to bright. It is possible to adjust the light
intensity while in the “Off” mode however, the channel will not switch on unless a
“channel on” action is taken. This is an inherent safety feature. Figure 4 and Figure 5
demonstrate the difference in the software display when all channels are off and on
respectively.
Figure 4: Lights OFF - All Channels OFF
Figure 5: Lights ON- All Channels On
Seven channels are available. Channel 5 delivers highly broadband light and as
standard, is configured in the broadest band and referred to as Amber. As an option,
the emission can be restricted to the green band by changing the LED filter. Selecting
either “Amber” or “Green” tells the software which filter has been used to configure
the LED and this change will be reflected in the colour of channel 5 as displayed in
the software (See Figure 6): Selecting Green or Amber in the software does not
change the filter or spectral output of the LED. This is a manual process and must be