BlueBox niji, Руководство пользователя

Страница: 11 / 31

10
www.BlueBoxOptics.com V2.4
niji
Failure to adhere to all the safety conditions during operation will initiate lockout
mode. In lockout mode, no light will be emitted and the power indicator will flash red.
Should any combination of lockout conditions occur during operation then the
lockout warning in Figure 3 will be displayed in the software.
Figure 3: Lockout Screen Examples
3.8 Software Control
The very top of the software window shows the light status. This will read either “LIGHTS
ON” or “LIGHTS OFF”. The “LIGHTS OFF” status will only occur if all channels are turned
off as they are in Figure 4. When a single or multiple channels are switched on, the
status will change to “LIGHTS ON”. This is an integral safety feature by design.
See Table 1 for all available light source control commands:
Action Response
Right mouse click over a channel Channel On/Off
Select the “Off” button
Channel On
Select the “On” button
Channel Off
Mouse scroll up/down within the enabled channel
Intensity up/down
respectively
Channel slider up/down for enabled channels
Intensity up/down
respectively
Arrow keys on keyboard up/down
Intensity up/down
respectively
Arrow keys on screen up/down Intensity up/down
respectively
Overtype numerical values in the intensity selector
Intensity up/down
LIGHTS ON All Channels On
LIGHTS OFF All Channels Off
Table 1: Light Source Controls