8
Product Information
Battery Installation and Removing
[Battery
Installation]
[Removing the
Battery]
1. If pushing the center of
battery cover slightly, the
cover removes.
2. Using the stylus,
remove the battery from
the right groove.
1. Slip the battery into the
battery compartment top
edge first.
2. Insert the Battery Cover.
Always charge the battery only using the supplied adapter.
It can be charged with 24 pin(The Standard specified by the Ministry of Information and Communication) charger for general mobile
phones. (It may be discharged gradually after full charging due to the nature of the standard charger).
SD Memory Card
•
Frequent insertion/removal of
memory or excessive force can
cause a failure on the equipment.
•
If removed the card and turned off
the power while using the memory
card, it can cause a data loss or
mis-operation of memory card and
PDA.
•
Always backup the important data
at PC. Otherwise, the manufacturer
assumes no liability for data loss.
•
If the memory card removed well,
do not remove the card forcedly and
contact the AS center. If necessary,
you can replace it with the applicable
product or refund it.
Battery
Installation Grip
Insertion Area
After the metal
terminal of memory
faced toward the
bottom of rear, push
to the end. If slightly
pressed the end of
memory visible at SD
Slot, it removes.
