14
Copyright © 2004 Bluebird Soft, Inc. All Rights Reserved.
BIP-1250 Series
3-2. Precautions for using ActiveSync
3.Precautions
3.Precautions
3.Precautions
A. Before getting started:
①. Uninstall the ActiveSync program installed on your PC.
②. Reinstall ActiveSync 3.7. When the [Get Connected] dialog box
appears during installation, click [Cancel].
③. When installation is complete, select [File]→[Connection
Settings]from the ActiveSync Menu. When a dialog box appears,
check
“
Allow USB connection with this desktop computer
”
, and ensure
that the message
“
Status: USB is available
”
appears at the bottom of
the window. If the [Get Connected] dialog box appears, it means that
the old USB driver that causes malfunction will exists in the PC. In this
case, remove the device in error.
Select [Control Panel] →
[Management Tools] → [Computer Management ]→ [System Tool] →
[Device Manager] on your desktop, and remove the device in error
listed under
“
Windows CE USB Devices
”
.
B. When the message
“
Unknown Device
”
appears after the PC detects a
USB device:
①. This message may appear when you turn on the PDA while it is sitting
on the cradle.
②. Remove the PDA from the cradle and reconnect it. ActiveSync should
work properly.
C. When the message [Connecting
…
.]appears in ActiveSync for a long
time without any change:
①. Remove the PDA from the cradle to disconnect it.
②. From the ActiveSync Menu, select [File] ]→[Connection Settings].
When a dialog box appears, uncheck the checkbox
“
Allow USB
connection with this desktop computer
”
and click [OK]
③. Select [Connection Settings]again. When the dialog box appears,
check the checkbox for
“
Allow USB connection with this desktop
computer
”
and click [OK]
④. Connect the PDA to the cradle. ActiveSync should work properly.
Содержание BIP-1250 Series
Страница 25: ......