1.0
Introduction
Congratulations on purchasing the Chem-Feed® Engineered Wall Skid System. The system is designed with the
necessary components to safely inject liquid chemical into a system.
Your Chem-Feed® Engineered Wall Skid System is pre-configured based on your selections via the matrix or
when designed with our engineering staff.
Please Note:
Your new Chem-Feed® System has been pressure tested at the factory with clean water for a
minimum of four hours before shipping. You may notice trace amounts of clean water in the system. This is part of
our stringent quality assurance program at Blue-White Industries.
!
2.0
Features
Chem-Feed® Engineered Skid Systems
were designed and engineered using solid modeling tools for superior piping
installation and easy component maintenance. Custom engineered universal mounting blocks and pre-machined
mounting slots provide for easy component servicing and replacement. Each factory built and tested system includes
the following standard components:
!
Pressure Relief Valve -
Protects the system from over-pressurization, 5-150 psi setting range, 150 psi maximum system
pressure. Ships on all systems.
!
Check Valve -
Protects the user from back-flow during pump maintenance. Ships on all systems.
!
Flow Verification Sensor -
MS6 accurately verifies chemical feed. Exclusive to Blue-White®.
!
Inlet Y Strainer -
Protects system components from damage cause by dirt or debris.
!
Calibration Cylinder -
Confirm pump output under system conditions. Specify cylinder volumes from 3 GPH to 128
GPH.
!
Pulsation Dampener -
Protect the system components from pulsation. Recommended for diaphragm pump systems.
Not recommended for peristaltic pump systems.
!
Pressure Gauge with Guard -
Isolate and protect the system pressure gauge. Specify pressure ranges from 0-30 psi,
0-100 psi, or 0-200 psi.
!
Strut Mounts -
FRP Strut is provided with the skid to ensure sturdy support for wall mounting.
!
Corrosion Resistant -
Chem-Feed® frame constructed of chemically resistant polyethylene.
!
Pump Mount Bracket -
Constructed of chemically resistant polyethylene.
Page 4
Page 5
®
CHEM-FEED CFWS
®
CHEM-FEED CFWS
3.0
Specifications
Items listed below are standard available items and ship with most configurations. Your system may be custom-
ized with components not listed below.
