INSTALLATION
Step-By-Step
1
Measure
Use the provided drawing dimensions to determine best mounting
location of panel.
Measure wall and locate mounting holes. Panels should be mounted
at an elevation to allow for easy access to control unit.
Wall Mount Weight: 45 lbs
Install Strut
Use the provided strut and hardware to mount the panel.
Strut to be mounted securely to wall using appropriate hardware.
Strut spacing is on 18” centerline.
If using provided anchor bolts, drill holes in concrete and clean
thoroughly. Located strut and mount with appropriate tools.
Check to make sure strut is secure and level.
2
4
Connect Electrical and Tubing
Use provided electrical diagram to connect power and
communication wiring.
Consult with electrical profession before performing any
electrical work.
Mount Panel
Mounting panel will requires 2 or 3 persons.
Mount panel to strut using provided hardware.
Be sure panel is level before securing.
Check spacing and panel before connecting electrical and piping.
3
5
Power Up System
Check all electrical connections before powering on system.
Check piping connections for leaks.
System is activated when power is applied.
