Blue-White industries flexflo A-100NV Скачать руководство пользователя страница 20

LIMITED WARRANTY

Your new pump is a quality product and is warranted to be free of defects as set down in this policy.  All parts, including rubberized goods, and labor 
are covered under warranty for 90 days from the date of purchase.  Used peristaltic pump tube assemblies are not warranted.  Parts, excluding 
rubberized goods, are covered under warranty for 12 months from the date of purchase.  
Warranty coverage does not include damage to the pump that results from misuse, carelessness, abuse or alteration.  Only the repair or the 
replacement of the pump is covered.  Blue-White Industries does not assume responsibility for any other loss or damage.
Warranty status is determined by the pump’s serial label and the sales invoice or receipt.  The serial label must be on the pump and the pump must be 
accompanied by the sales invoice or receipt to obtain warranty coverage.  The warranty status of the pump will be verified by Blue-White or a factory 
authorized service center.

Please be advised; injection and metering devices are not intended as a means of treating water to render it suitable for human consumption.  When 
used as hypochlorinators, they are meant to destroy bacteria and algae contamination, before it’s removal by filtration.  Acid and soda injectors are 
used for PH control (balance).  Blue-White injectors are factory tested with water only for pressure and performance.  

Installers and operators of 

these devices must be well informed and aware of the precautions to be taken when injecting various chemicals -especially those considered 
hazardous or dangerous.

Should it become necessary to return an injector for repair or service, you must attach information regarding the chemical used as some residue may 
be present within the unit which could be a hazard to service personnel.
Blue-White Industries will not be liable for any damage that may result by the use of chemicals with their injectors and it’s components.  Thank you.

PROCEDURE FOR IN WARRANTY REPAIR

Carefully pack the pump to be repaired, include the foot strainer and injection/check valve fitting.  Enclose a brief description of the problem as well 
as the original invoice or sales receipt showing the date of purchase.  The receipt will be returned with the unit.  Prepay all shipping costs.  COD 
shipments will not be accepted.  Warranty service must be performed by the factory or an authorized service center.  Damage caused by improper 
packaging is the responsibility of the sender. 

AUTHORIZED SERVICE CENTERS

ARKANSAS

FLORIDA

MARYLAND

BT Environmental, Inc

AAA Electric Motor Services

Century Pool Service, Inc

Bill Thomason

1131 N.E. 45th Street

5020 Nicholson Court, #201

225 Castleberry Street

Ft. Lauderdale, FL 33334

Kensington, MD 20895

Hot Springs, AR 71901

305-772-7501

301-231-8999

501-624-3837

All American Pool & Patio

NEVADA

CALIFORNIA (NORTHERN)

2021 Curry Ford Road

Swim-In Enterprises, Inc.

Orlando, FL 32806

Howard E. Hutching company

1314 S. Main Street

407-898-8722

(Repair Center)

Las Vegas, NV 89104

7190 Penryn Plaza

Rice Pump & Motor Repair

702-384-4223

Penryn, CA 95663

5740 N.W. 9 ave.
Ft. Lauderdale FL 33309

NEW YORK

Pool-Tech, Inc.

954-776-6049

Sherwood Specialties, Inc.

401 Sunset Dr., Suite A.

412 Smith Street

Antioch, CA 94509

American Pump

Rochester, NY 14608

925-754-2424

7580-A W. Tennessee St.

716-546-1211

Tallahassee, FL 32304

Swimco Electric Co.

850-575-9618

753 Camden Avenue

NORTH CAROLINA

Campbell, CA 95008

Jerry Lee Chemical Co.

Southern Industrial Sales 

408-378-2607

3407 W. Old Fairfield Drive

1903 Herring Avenue

Pensacola, FL 32505

Wilson, NC 27893

CALIFORNIA (SOUTHERN)

904-432-9929

919-237-2500

Blue-White Industries

Picard Chemical

(Repair Center)

1670 S. Congress Avenue

SOUTH DAKOTA

5422 Business Drive

W. Palm Beach, FL 33406

Son-Aqua Distributing

Huntington Bch. CA 92649

407-965-3434

Jim Robinson

714-893-8529

2447 W. Main Street

V.J. Mini & Son, Inc.

Rapid City, SD 57702

COLORADO

1581 N. Dixie Highway

605-343-7716

Denver Winpump

Pompano Beach, FL 33060

4845 Pontiac Street

305-946-0920

TENNESSEE

Commerce City, CO 80022

Rock City Machine

303-287-2884

ILLINOIS

307 3rd Avenue South

CONNECTICUT

Nashville, TN 37201

Mullarkey Associates

Cronin-Cook  & Associates

615-244-1371

(Repair Center)

24 West Road

12346 S. Keeler Ave.

Vernon, CT 06066

TEXAS

Alsip, IL 60658

203-875-0544

Alamo Water Refiners

708-597-5558

13700 Hwy. 90 West
San Antonio, TX 78245
512-677-8400

# 80000-381

Rev.   7/18/2003

Содержание flexflo A-100NV





















Отзывы: