12
4
4
POOL ASSEMBLY INSTRUCTIONS (CONTINUED)
2
2
2
2
8.
Carefully slide the Horizontal Beams (2) into the sleeves of the pool.
9.
Connect the T-Fitting (4) to the Horizontal Beam (2).
IMPORTANT:
The last T-Fitting
(4)
can be difficult to connect. Connect the first side of the Horizontal Beam to
the T-Fitting. Then, angle the second side of the T-Fitting up slightly and begin to push the Horizontal Beam
into the T-Fitting. Finish sliding the Horizontal Beam into the T-Fitting and ensure it is secure.
4
10.
Insert the Pins (6) down through the top of the T-Fittings until the Pins snap into place on the
lower side of the T-fitting.
11.
Carefully slide the Vertical Legs (3) up through the belt that runs around the pool.
TIP:
For smaller pools
without a belt, slide the vertical legs up through the sleeves on the pool wall.
7
3
3
6
3
3