11
POOL ASSEMBLY INSTRUCTIONS
Before assembling your product, please take a few minutes to check the contents and become familiar with all
the parts.
WARNING!
DO NOT
overfill the pool
DRAIN
the pool to the proper level after a heavy rain.
TIP:
It will be much easier to install your pool if you unfold it and let it lay in direct sunlight for about 2 hours
prior to installation. This will help to ensure a wrinkle-free fit because the pool material will be more pliable
allowing it to form into shape during installation.
1.
Carefully unfold the pool liner in the area selected and inspect the seams for manufacturing
defects.
2.
It is recommended to let the pool sit out in direct sunlight for about 2 hours prior to installation
(see TIP above).
3.
LIFT the pool liner across the ground. DO NOT drag the liner from one location to another
location.
4.
Locate the pool so that the pump opening is within the length of the electrical cord of the GFCI
protected electrical outlet.
POOL LADDER ASSEMBLY
• Follow the assembly instructions that came with the ladder for your pool. Assembling the ladder
now will allow you to use it for access into and out of the pool during the liner installation process.
POOL ASSEMBLY INSTRUCTIONS (CONTINUED)
NOTE!
Depending on the size of your pool, there will be different quantities of the frame components. The
diagrams below are for visual reference only.
6.
Insert the Vertical Legs (3) into the Leg Caps (5)
7.
Lay all the parts on the ground as shown below.
CAUTION!
Position the liner with the openings for the pump’s water connections facing the electrical outlet.
2
4
*Image for reference only.
3
5
1
2
4
