Blue Square Labs BSLOLSK6514T20UAG, Руководство пользователя, Страница: 15 / 26

12
Settings
OSD Time
Adjust the OSD time:
5s , 10s , 15s , 20s , 30s , and Constant
MHL Auto Switch
Adjust the MHL Auto Switch:
MHL switching can be adjusted
ON or OFF . This function is
only adjustable when a source device is connected via HDMI4
Light Sensor Front Light sensor can be toggled ON and OFF
HDMI CEC CEC Control can be toggled ON and OFF
HDMI EDID Version
Adjust the HDMI EDID Version:
Default Mode , EDID1.4 , and EDID2.0
Restore to Defaults Restore all settings to factory defaults, and restart the system
Please Note:
Different models paired with different sources may alter the menu options dependant on conditions
Sound
Sound Mode
Select the sound effect mode: Standard , Music , Movie , and
User
Bass
Adjust the Bass Output:
Increase the analogue value to raise the bass level,; decrease
the analogue value to lower the bass lebel (0-100)
Treble
Adjust the Treble Output:
The greater the analogue value (0-100), the higher the treble
Sound Balance
Adjust the balance between the left and right channels:
Adjust the analogue value left to increase the volume of the
left in-built speaker; adjust the analogue value right to
increase the volume of the right in-built speaker. By default,
the parameter is set to 0
– allowing for the left and right
speaker to produce a balanced output at the same volume.
SPDIF Out Select the digital sound output mode: PCM , RAW , and OFF
Please Note: The analogue values of Bass and Treble are adjustable only in User
Mode