Blue Square Labs BSLOLSK6514T20UAG, Руководство пользователя, Страница: 12 / 26

9
Basic Operations
Power On/Standby
Insert the power plug into the power outlet. First turn on the On/Off button on the product,
alternatively; press the power button on the remote control to turn on the product. If you press
the button on the remote, when the panel is in a power-on state, the unit will enter Standby.
Source Selection
Upon start-up , press “SOURCE” on the remote control; the screen will display the “Input Source”
menu. At this moment you can press on the remote control or “ ” on the front panel to
select a source. Press “OK” on the remote control; the product will switch to the input source
selected.
Menu Operations
The menu operations described in this section are relative to the LCD panel when in standard
operation. For operations in the intelligent mode, please refer to the instructions below.
Sidebar Menu: First press Source once to show the sidebar by swiping on the right side; then press
Source again to close the sidebar.