Blue Seal E25, Руководство по обслуживанию

Страница: 26 / 46

-26-
Revision 3/F3542
Two Bolts
Two Screws
3) Uncrimp the retaining lugs of the window
spacer and remove the spacer and glass.
Retaining
Lugs
Figure 6.3.17
6.3.13 INNER GLASS
1) Remove the outer glass (refer 6.3.12).
2) Undo two screws and remove the top trim
and handle assembly.
6.3.14 DOOR SEALS
1) Open oven door.
2) To remove, hold at their centre point and
pull forward until they unclip
3) Refit new seals.
Note: Fit top and bottom seals first, with
open side of seal facing
downwards. Fit side seals with
open side facing outwards.
Figure 6.3.16
4) To replace, ensure the silicone rubber seal
has not been displaced. Clean the glass
and refit it. Place the window spacer in
position and crimp the retaining lugs over
to hold the glass in place. Refit outer
glass as above.
Two Screws
6.3.15 DOOR HANDLE
1) Remove the door (refer 6.3.12).
2) Undo two screws and remove the top trim
and handle assembly, taking care not to
dislodge the outer glass.
3) Undo two bolts securing handle to top
trim. Replace handle and reassemble in
reverse order.
6.3.16 DOOR HINGES
1) Remove outer glass (refer 6.3.12).
2) Undo two screws securing hinge assembly
to oven door.
Figure 6.3.18
3) Withdraw hinge assembly and replace.
Reassemble in reverse order.
Figure 6.3.19
6.3.17 HINGE COUNTER BRACKETS
1) Remove door (refer 6.3.12).
2) Remove screws from back of oven secur-
ing wrapper to oven.
Figure 6.3.20
3) Turn oven onto its back and remove three
screws at each side securing wrapper,
and two securing insulation panel.