Outdoor LP Gas Barbecue Grill Model No. GBT806A
Contact 1.800.762.1142 for assistance. Do not return to place of purchase.
For great recipes and tips, visit recipes.uniflame.com
This grill is designed to operate with a one pound
7.75” or 10.6” high disposable / 16.4 oz. or 14.1 oz.
propane gas tank (DOT 39 Cylinder). (Figure 1)
DO NOT ATTEMPT TO REFILL ANY ONE POUND
(16.4 oz. or 14.1 oz.) PROPANE GAS TANKS!
Connect LP Gas Tank
Only cylinders marked “propane” may be used.
Note
: Some 1-lb cylinders may form frost when near
empty.
1. Make sure the regulator/control knob is in the
“LOCK/OFF” position. (Figure 2)
2. Lubricate the threads of the regulator/control knob
with petroleum jelly. Line up threads on LP gas
tank with regulator/control knob.
3. Insert and rotate LP gas tank clockwise until
they fit snugly together. HAND TIGHTEN ONLY. Be
careful not to cross threads when screwing in
canister. (Figure 3a)
4. Test for leaks, see “Checking for Leaks” section.
Disconnect LP Gas Tank
1. Turn the regulator/control knob to the “LOCK/OFF”
position. (Figure 2)
2. Rotate LP gas tank counterclockwise until it is
loose. (Figure 3b)
3. Store the LP gas tank in a proper location.
Burner Connection
Make sure the regulator/control knob is securely
fastened to the burner. (Figure 4)
Note: The brass nut should be 1/4 to 1/2 turn past
tight. The regulator will rotate 360º even when the
brass nut is tightened.
If your unit was assembled for you, visually check
the connection between the burner and control
valve.
If you have questions contact 1.800.762.1142 for
assistance.
WARNING: Failure to inspect
this connection or follow these
instructions could cause a fire or an
explosion which can cause death,
serious bodily injury or damage to
property.
Checking for Leaks
1. Make 2-3 oz. of leak solution by mixing one part
liquid dishwashing soap with three parts water.
2. Make sure regulator/control knob is “LOCK/OFF”.
(Figure 2)
3. Spoon several drops of solution, or use squirt
bottle, at all “X” locations. (Figures 4 & 5)
4. Inspect the solution at the connections, looking for
bubbles.
a. If NO bubbles appear after one minute, the
connections are secure. Wipe away solution
and proceed.
b. If bubbles appear, you have a leak.
1. Remove the LP gas tank and reconnect,
making sure the connection is secure.
2. Retest with solution.
If you continue to see bubbles after several
attempts, disconnect LP gas tank and
contact 1.800.762.1142 for assistance.
First Use
1. Make sure all labels, packaging and protective
films have been removed from the grill.
2. Remove manufacturing oils before cooking on this
grill for the first time by operating the grill for at
least 15 minutes on “HIGH” with the lid closed.
This will “heat clean” the internal parts and
dissipate odors.
Assembly Instructions (continued)
Figure 1
1 lb
453 g
7.75 in
. / 19,7 cm
3.875 in. / 9,8 cm
2.9 in. / 7,4 cm
1 lb
453 g
10.6 in.
/ 26,9 cm
Figure 2
LOCKOFF
OFF
LOW
MED
HIGH
PUSH
TO
TURN ON
Figure 3a Figure 3b
Figure 4
X
Figure 5
X
X
Figure 6
Match
Operating Instructions
10
Lock Lid
Unlock Lid
9
Insert Heat Plate and Cooking Grid
