BLUE JAY BJ-PR200 Series Скачать руководство пользователя страница 27

Страница: 27 / 27

User Manual

Tel: +0086-023-67628702 Email:[email protected]
www.cqbluejay.com
Add: 1802,Building 2,No.88,Jianxin East Road,Chongqing,400020,China - 26 -

8. - SAFETY CONSIDERATIONS

All installation specification described at the previous chapters named:

INSTALLATION AND STARTUP, INSTALLATION MODES and

SPECIFICATIONS.

Note that with the instrument powered on, the terminals could be dangerous to touching and

cover opening actions or elements removal may allow accessing dangerous parts. This

instrument is factory-shipped at proper operation condition.

9. - MAINTENANCE

The PR200 series not require any special maintenance. No adjustment, maintenance or repairing

action should be done when the instrument is open and powered on, should those actions are

essential, high-qualified operators must perform them.

Before any adjustment, replacement, maintenance or repairing operation is carried out; the

instrument must be disconnected from any power supply source.

When any protection failure is suspected to exist, the instrument must be immediately put out of

service. The instrum

ent’s design allows a quick replacement in case of any failure.

For any inquiry about the instrument performance or whether any failure

happens, contact to Blue Jay

’s technical service.

Blue Jay - After-sales service

E-mail: [email protected]

Содержание BJ-PR200 Series




























Результаты поиска

Содержание BJ-PR200 Series

Отзывы:

Похожие инструкции для BJ-PR200 Series

Бренды по названию

Популярные бренды

BLUE JAY BJ-PR200 Series, Руководство пользователя

Результаты поиска

Содержание BJ-PR200 Series

Отзывы:

Похожие инструкции для BJ-PR200 Series

Бренды по названию

Популярные бренды