Blue Giant EPJ-60R, Руководство пользователя

Страница: 39 / 94

7-3. Load Wheel.
7-3.1. Removal
1. Raise forks.
2. Turn off the key switch (13, Figure 12-13 ) and dis-
connect the batteries.
3. Block the drive wheel to prevent the truck from
rolling.
4. Jack up the forks to raise the load wheels off the
floor. Securely block the forks in the raised posi-
tion by positioning supports under both fork tips.
NOTE:
When shaft (20, Figure 12-8 ) is removed,
load wheel assembly (19) will drop free.
5. Remove pin (6) securing shaft (20) and remove
shaft (20) and load wheel assembly (19).
NOTE:
Inspect the load wheel assembly. If the load
wheel is worn within 1/8" of the metal sleeve,
or is cracked or damaged, replace the entire
load wheel and bearing assembly.
Blue
Giant
recommends that both load
wheel assemblies be replaced at the
same time. This ensures level and safe
operation of the lift truck.
7-3.2. Repair
6. Remove washers (23, Figure 12-8 ), bearings (21)
and washers (22) from wheels (19).
7. Inspect bearings (21) and replace if necessary.
8. Reassemble washers (23), bearings (21) and
washers (22) in wheels (19).
7-3.3. Load Wheel Installation
1. Position load wheel assembly (19, Figure 12-8 ) in
wheel bracket (17).
2. Install shaft (20) and secure with pin (6).
3. Remove blocking from under the truck.
4. Lower the forks.
5. Reconnect the batteries and turn on the keyswitch
(13,
Figure 12-13 ).
7-4. CASTERS
Casters provide for additional stability. Installation of
the casters is shown in
Figure 12-7 and repair parts as
shown in Figure 12-9 .