Blue Giant EPJ-60R, Руководство пользователя

Страница: 37 / 94

SECTION 7
TRANSMISSION, DRIVE WHEEL, LOAD WHEEL
7-1. Drive Wheel.
1. Turn off the key switch (13, Figure 12-13 ) and dis-
connect the batteries.
2. Remove the compartment covers as described in
paragraph
5-3.
3. Loosen but do not remove the six screws (35, Fig-
ure 7-1 ).
4. Jack up the truck so the drive wheel is off the
ground; then securely block the truck to prevent
movement.
5. Remove the six screws (35) and drive wheel (47)
from the transmission.
6. Install new drive wheel in reverse order of
removal.
7. Install the compartment covers as described in
paragraph
5-3.
8. Reconnect the batteries and turn on the keyswitch
(13,
Figure 12-13 ).
7-2. Transmission.
1. Turn off the key switch (13, Figure 12-13 ) and dis-
connect the batteries.
2. Block the load wheels securely.
3. Remove the compartment covers as described in
paragraph
5-3.
4. Remove the brake (49, Figure 7-1 ) as described
in paragraph 6-1.3.
5. Remove the drive motor (48, Figure 7-1 ) as
described in paragraph 10-4.
6. Using a suitable means, raise the truck frame
enough to provide cleanance for removal of the
transmission/motot/brake.
7. Support the transmission and remove six screws
(7,
Figure 7-2 ), six lock washers (8) and six flat
washers (9).
8. Slowly lower the transmission out the bottom of
the frame.
9. Install new transmission by reversing the steps
above.
Figure 7-1 Transmission, Motor, Brake Assembly
R6783