Blue Diamond HD 2 Series, Руководство по эксплуатации и обслуживанию

Страница: 22 / 52

Material Bar
Material Bar Adjustment / Replacement
DANGER
AVOID SERIOUS INJURY OR DEATH
Before
servicing the
HD series 2 power rake
:
• Lower the
HD series 2 power rake
and
place the power rake on flat, level surface.
• Engage parking brake, stop engine,
remove the key and exit the machine.
• Disconnect attachment hydraulic hoses.
Material Bar Adjustment
Figure 10
To adjust the material bar, loosen both nuts (Item
1) [Figure 10] (both sides) and adjust either up or
down.
Adjusting the material bar up will let more material
pass through the
HD series 2 power rake
and
adjusting the material bar down will hold back
material like rocks and debris.
NOTE: When adjusting the material bar make
sure the material bar is level.
Material Bar Removal / Installation
Figure 11
Remove the nuts, washers and U-bolts (Item 1)
[Figure 11] from the material bar (both sides).
Remove material bar.
Align material bar mounts (both sides) onto the
frame.
Install U-bolts, washers and nuts.
NOTE: Verify that material bar is level, centered
and adjusted to desired gap, then tighten
bolts.
1
1
Blue Diamond® Attachments 22