Attachment Installation
IMPORTANT
See the machine’s Operator’s Manual for
detailed information on operating the loader.
Entering The Operator’s Position
Use the attachment safety treads, handles and
steps (on the machine) to enter the operator’s
position.
When in the operator’s position, lower safety seat
bar (if equipped), fasten the seat belt, start the
engine and release the parking brake.
Leaving The Operator’s Position
WARNING
AVOID SERIOUS INJURY OR DEATH
Before leaving the operator’s position:
•
Always park on a flat level surface.
•
Lower the attachment and place
attachment flat on the ground.
•
Place all controls in NEUTRAL.
•
Engage the park brake.
•
Stop the engine and remove the key.
•
Wait for all moving parts to stop.
SEE MACHINE’S OPERATOR’S MANUAL
FOR ADDITIONAL INFORMATION.
Park the machine / attachment on a flat level
surface.
Place all controls in neutral, engage the park
brake, stop the engine and wait for all moving
parts to stop. Leave the operator’s position.
Connecting Attachment To The Skid Steer
WARNING
CRUSH HAZARD
•
Before moving the machine, look in all
directions and make sure no bystanders,
especially small children are in the work
area. Do not allow anyone between the
machine
and
attachment
when
approaching
the
attachment
for
connecting.
•
Keep fingers and hands out of pinch
points
when
connecting
and
disconnecting attachment.
Figure 1
Inspect the HD power rake’s mounting flange
(Item 1) and wedge mounts (Item 2)
and all welds on the
HD series 2 power rake
for
wear or
damage each time the
HD series 2 power
rake
is removed
from the machine.
1
2
2
Blue Diamond® Attachments
11
Содержание HD 2 Series
Страница 5: ...1 2 Safety Decals Blue Diamond Attachments 5...
Страница 51: ...Blue Diamond Attachments 52...
