Blue Coat PacketShaper PS12000 Series, Руководство по обслуживанию и модернизации

Страница: 14 / 50

14 PacketShaper 12000 Series Maintenance Guide
PS12000 LAN Expansion Module
LEM Card Listing
The table below lists the available LEM cards for the PS12000 Series appliance and their
requirements. A low-profile dual-port card replaces the existing Gigabit card found in the
main slot (the left-most expansion slot when looking from the rear). The full-height four-port
expansion cards can only be installed into the LEM slot due to the size of the card.
Network Card Description Expansion Slot Usage
Additional
Requirements
LEM-PS12000-2GigE-CU Dual-port module:
10/100/1000BASE-T Copper LEM
(1 Bridge)
*The PS12000 comes equipped
with this card in the main slot. Main slot (low-profile, replaces
existing card)
None
LEM-PS12000-2GigE-SX Dual-port module: 1000BASE-SX
Fiber-Optic LEM (1 Bridge) None
LEM-PS12000-2GigE-LX Dual-port module: 1000BASE-LX
Fiber-Optic LEM (1 Bridge) Requires
PacketWise 8.7.1
or higher
LEM-PS12000-10G-CX-LP Dual-port module: 10GBASE-CX4
Copper LEM (1 Bridge) None
LEM-PS12000-4GigE-CU Four-port module:
10/100/1000BASE-T Copper LEM
(2 Bridges)
LEM slot (full-height)
None
LEM-PS12000-4GigE-SX Four-port module: 1000BASE-SX
Fiber-Optic LEM (2 Bridges) None
LEM-PS12000-4GigE-LX Four-port module: 1000BASE-LX
Fiber-Optic LEM (2 Bridges) Requires
PacketWise 8.7.1
or higher
LEM-PS12000-10G-CX-FP Dual-port module: 10GBASE-CX4
Copper LEM (1 Bridge) None