Blue Coat PacketShaper PS12000 Series, Руководство по обслуживанию и модернизации

Страница: 23 / 50

PacketShaper 12000 Series Maintenance Guide 23
PS12000 LAN Expansion Module
Replacing the Main Slot LEM Card
To replace the low-profile LEM card in a PacketShaper 12000 Series appliance:
1. Power off the appliance and disconnect both power cords. Unplug the power cords from
the AC power outlet and then from the appliance.
2. Remove the rear top cover.
a. Take off the screw on the top cover.
b. Slide and lift the top cover off the appliance by pressing the blue button and sliding
the top cover towards the rear of the appliance. After it slides out about an inch, lift
the cover off the chassis.
3. Move to the rear of the appliance and lift the PCI riser card assembly by loosening the
thumbscrews and then unlocking the release clips.
1
2
System Dri
ve
a
b
a
b
c