Blue Coat PacketShaper PS12000 Series, Руководство по обслуживанию и модернизации

Страница: 8 / 50

About This Guide
8 PacketShaper 12000 Series Maintenance Guide
PacketShaper LEDs
The LEDs on the PS12000 series appliances display the health of the appliance and the status
of individual components.
The front-panel LED indicates power supply input, disk activity, interface activity, and system
status.
System fan LEDs are located on the system fan board inside the appliance. The failure of a
system fan triggers the fan failure LED, which is located on the system fan board inside the
chassis, and the system status LED, which is located on the front-panel of the appliance.
The rear panel includes the power supply adapter LED, which indicates proper functioning of
the power supply units and the ID LED that is used to locate the appliance when rack
mounted.
Front Panel LEDs Color Status
1. Power Blue System is operational
Blue: flickering System is in power saving state
Off System is powered off
2. ID
Press the ID button to illuminate the front and
back ID LEDs. The rear panel LED helps you to
easily identify this appliance when it is installed
in a rack with other appliances.
You can activate this LED using IPMI commands
too.
Off Not in use because the ID button has not
been pressed.
Amber Enabled (the ID button is activated)
3
5
1 2
DATA HDD
1 2
1 2 4