PE3M Small Form Factor PC
User Guide - Specification
Page 8
Specification
CPU:
Intel Pentium and Celeron P4 mPGA478 processors auto-detected from 1.7 GHz
to 3 GHz, with 400 or 533 MHz FSB.
CPU Voltage:
Auto-detection, providing voltages from 1.05V to 1.825V.
Chipset:
Uses the Intel 845GE/845GV Chipset. Selects FSB speed from within the BIOS.
Graphics Controller:
Integrated Intel Extreme Graphics controller with AGP 2.0 4x 2D & 3D graphics
accelerator. The following wide-screen resolutions are supported by the
software drivers:
848x480, 1280x720, 1280x768, 1368x768, 1024x512, 1024x1024
Picture rotation 0, 90, 180, 270 degrees without degradation, as standard.
BIOS:
2 Mbit Flash upgradeable Award AGP/PCI BIOS
Memory:
Two 184-pin DIMM sockets for 128, 256, 512MB or 1GB of PC1600 or PC2100
compliant 2.5V single or double side buffered DDR SDRAM. Provides up to
2GB of system memory.
LAN:
On-board Realtek RTL8100B supports 10/100 Mb/s rate, supports ACPI power
management and WOL function.
System Management:
CPU and system voltage detection.
CPU and secondary fan speed detection.
Audio:
On-board Realtek ALC650 provides AC'97 2.2 Sound interface.
Expansion Slots:
One 32-bit PCI v2.2 slot riser card for short PCI expansion card. Maximum card
length 190 mm to front face of connector bracket.
One AGP 2.0, 1.5V only, x4 slot riser card for short AGP expansion card.
Maximum card length 190 mm to front face of connector bracket.
Primary Storage:
One 2½-inch IDE UDMA ATA33/66/100 hard disk drive.
Secondary Storage:
Single slim-line drive bay supports optional IDE slim-line CD-ROM, CD-RW or
slim-line DVD-ROM drive.
External I/O Interface:
PS/2 Mouse connector.
PS/2 Keyboard connector.
Standard VGA connector.
Two 9-way Serial connectors (16550 compatible).
25-way Parallel port connector (SPP, EPP, and ECP).
Two USB 2.0 connectors.
RJ-45 10/100Base-T Ethernet LAN connector.
Audio Microphone In, Line In and Line Out sockets.
Indicators:
Power On LED, Hard drive activity LED
Control:
Power standby pushbutton switch,
Recessed processor Reset switch.
Watchdog:
Programmable timer, 2.4 to 37 seconds.
