BLUE CHIP PE3M Скачать руководство пользователя страница 4

PE3M Small Form Factor PC

 

Introduction

Page 4

INTRODUCTION

Copyright

All rights reserved.  No part of this publication may be reproduced, stored in any retrieval system, or
transmitted, in any form or by any means, electronic, mechanical, photocopied, recorded or otherwise, without
the prior permission, in writing, from the publisher.  For permission in the UK please contact Blue Chip
Technology.

Information offered in this manual is believed to be correct at the time of printing.  Blue Chip Technology
accepts no responsibility for any inaccuracies.   The information contained herein is subject to change without
notice.  There are no express or implied licences granted herein to any intellectual property rights of Blue Chip
Technology Ltd.

Limitations of Liability

In no event shall Blue Chip Technology be held liable for any loss, expenses or damages of any kind
whatsoever, whether direct, indirect, incidental or consequential, arising from the design or use of this product
or the support materials supplied with this product. If this product proves to be defective, Blue Chip
Technology is only obliged to replace or refund the purchase price at Blue Chip Technology's discretion
according to their Terms and Conditions of Sale.

 

Trademarks

All trademarks and registered names acknowledged.

 

IBM, PC, AT and PS/2 are trademarks of International Business Machines Corporation (IBM).

 

Intel is a registered trademark of the Intel Corporation.

 

All 80x86, Celeron and Pentium processors are registered trademarks of Intel Corporation.

 

Extreme Graphics is a registered trademark of the Intel Corporation.

 

Realtek is a registered trademark of Realtek Semiconductor Corporation.

 

Award is a registered trademark of Award Software, Inc.

 

MSDOS and WINDOWS are registered trademarks of the Microsoft Corporation.

 

Содержание PE3M



































Отзывы: