PE3M Small Form Factor PC
Internal Connections
Page 22
Internal Connections
There are connectors on the main processor board for the CPU, memory, power and various additional
peripherals. For the location of these items please see the photograph below. Your board may vary slightly from
that shown.
CPU Socket
CPU Fan Connector
DIMM Sockets
Power Connectors
Front Panel
Connectors
Auxiliary Fan
System Fan
RTC Battery
AGP Socket
PCI Socket
Audio Aux In
Audio CD In
CMOS Jumper
Secondary IDE
Primary IDE
CPU FSB
Floppy Disk
Connector
CPU Socket
Standard Socket mPGA478 Intel Pentium & Celeron P4 processors.
Memory Sockets
Two 184-pin DIMM sockets for 128, 256, 512MB or 1GB of PC1600 or PC2100 compliant 2.5V DDR
SDRAM. Provides up to 2GB of system memory.
Power
Standard 20-pin ATX Power connector (
PW
).
Standard 4-pin ATX-12V Power Connector (
PW1
).
PCI Expansion Slot
The motherboard includes one 32-bit PCI v2.2 expansion slot (
PCI 1
). Into this is plugged a short riser
card. The riser card will accept a short 32-bit PCI expansion card.
AGP Graphics Slot
The motherboard includes one x4 AGP 2.0 graphics expansion slot (
AGP 1
) that supports only 1.5V
AGP cards. Into this is plugged a short riser card. The riser card will accept a short single slot-width
AGP graphics expansion card.
