Input Connections
Page
23
Blue Chip Technology Ltd.
01271014.doc
Page 23
4.4.3 Example Program
The following example selects and interrupt frequency of 2KHz.
10
INPUT “BASE ADDRESS”; BASE
20
OUT BASE+13, & H2A
30
STOP
Whilst every effort has been taken to ensure that the information provided is
accurate, Blue Chip Technology cannot assume responsibility for any errors in
this manual or their consequences. Should any errors be detected, the company
would greatly appreciate being informed of them. A policy of continuos product
development is operated, resulting in the design of the board and the contents of
this document being subject to change without notice.