Specification
Page 3
Blue Chip Technology Ltd.
01271014.doc
Page 3
•
If difficulty with interference is experienced the cable should also be fitted
with a ferrite clamp as close as possible to the connector. The preferred type
is the Chomerics clip-on style, type H8FE-1004-AS.
•
It is recommended that cables are kept as short as possible, particularly
when dealing with low level signals.
•
Ensure that the screen of the external cable is bonded to a good RF earth at
the remote end of the cable.
Failure to observe these recommendations may invalidate the EMC compliance.
Warning
This is a Class A product. In a domestic environment this
product may cause radio interference in which case the user may
be required to take adequate measures.
EMC Specification
A Blue Chip Technology Icon industrial PC fitted with this card meets the
following specification:
Emissions:
EN 55022:1995
Radiated
Class A
Conducted
Class A & B
Immunity:
EN 50082-1:1992 incorporating
Electrostatic Discharge
IEC 801-2:1984
Performance Criteria B
Radio Frequency Susceptibility
IEC 801-3:1984
Performance Criteria A
Fast Burst Transients
IEC 801-4:1988
Performance Criteria B
