18
Make sure that the water inlet of the recovery circuit corresponds with
Make sure that the water inlet of the recovery circuit corresponds with
Make sure that the water inlet of the recovery circuit corresponds with
Make sure that the water inlet of the recovery circuit corresponds with
Make sure that the water inlet of the recovery circuit corresponds with
the connection marked by the dataplate:
the connection marked by the dataplate:
the connection marked by the dataplate:
the connection marked by the dataplate:
the connection marked by the dataplate:
4.6 HYDRAULIC CONNECTION TO THE RECOVERY CONDENSER (optional)
4.6 HYDRAULIC CONNECTION TO THE RECOVERY CONDENSER (optional)
4.6 HYDRAULIC CONNECTION TO THE RECOVERY CONDENSER (optional)
4.6 HYDRAULIC CONNECTION TO THE RECOVERY CONDENSER (optional)
4.6 HYDRAULIC CONNECTION TO THE RECOVERY CONDENSER (optional)
On all units provided with recovery unit, the relative water circuit connections consist of male and female threaded
steel pipes or grublock connections (according to size).
These units are equipped with thermostats for controlling the temperature of water returning from the installation.
The thermostat enables recovery when required, disconnecting the fans and restarting them once the water has
reached the desired temperature.
Special safety pressure switches command the start-up of the fans in the presence of faults on the recovery
condenser.
Thermostat and pressure switch calibration values are reported in the control system instruction handbook.
For appliances equipped with a recovery unit:
Installation of a three-way modulating valve with temperature probe on
Installation of a three-way modulating valve with temperature probe on
Installation of a three-way modulating valve with temperature probe on
Installation of a three-way modulating valve with temperature probe on
Installation of a three-way modulating valve with temperature probe on
the water inlet of the unit which ensures that water temperature is not
the water inlet of the unit which ensures that water temperature is not
the water inlet of the unit which ensures that water temperature is not
the water inlet of the unit which ensures that water temperature is not
the water inlet of the unit which ensures that water temperature is not
below 30°C is compulsory.
below 30°C is compulsory.
below 30°C is compulsory.
below 30°C is compulsory.
below 30°C is compulsory.
3 WAY VALVE
RECOVERY WATER OUTLET
RECOVERY WATER INTAKE
THREE-WAY VALVE LAYOUT
THREE-WAY VALVE LAYOUT
THREE-WAY VALVE LAYOUT
THREE-WAY VALVE LAYOUT
THREE-WAY VALVE LAYOUT
IN
RECOVERY WATER
Содержание KAPPA V 2001
Страница 69: ......
