Operating Instructions and Parts Manual
BCPA1
4
a. Mount the Advanced Text
Notification device to the sump
pump discharge pipe a minimum
of 4 ft. above the sump cover
using (2) of the mounting straps
included. (Figure 3) The Advanced
Text Notification device can also
be mounted to an interior wall.
Mounting to an exterior wall,
nearer to dirt or earth ground, can
reduce cellular signal.
PUSH TO TEST
Advanced Text
Notification
The Professional’s Line
Figure 3
b. Connect the dual float sensor to
the jacks located on the bottom of
the device. Secure the dual float
sensor on the discharge pipe at
the height you want the alarm to
activate using the hose clamp
provided. Loop the wire around
the zip tie to prevent the sensor
from slipping down the pipe. Do
not mount the dual float sensor
near an inflow pipe where water
could splash and give a false
alarm. (Figure 4)
PUSH TO TEST
Advanced Text
Notification
The Professional’s Line
Figure 4
Protect electrical cord from
sharp objects, hot surfaces, oil,
and chemicals. Avoid kinking the cord and replace
damaged components immediately.
c. Plug the device into a GFCI outlet
and turn the On/Off switch to
“On”. (Figure 5) NOTE: The status
light should now be solid green
Use above a completely
enclosed sump pit.
www.blueangelpumps.com/AdvancedText
You will receive 2 emails.
1. A receipt for your credit card
purchase. If you do not receive
this email, check your spam
folder.
2. An activation email containing
your device telephone number
that you will need to complete the
setup process. This process takes
on average, 15-30 minutes for the
activation email to arrive.
NOTE: Be sure to record the
device phone number on the front
page of this manual.
a. Once you have recorded the
device phone number from your
activation email, you will also
need to save this as a contact in
your phone. You can name this
anything you want. For example
“My Sump Pit” or your street
address for easy identification.
STEP 4 - EMAIL
CONFIRMATION
STEP 5 - SAVE DEVICE
NUMBER AS A CONTACT
STEP 6 - INSTALLATION
STEP 3 - ONLINE ACTIVATION
a. Log on to:
www.blueangelpumps.com/AdvancedText
to activate your texting service. You
will need the 6 digit Unit ID and
8 digit promo codes
(alphanumeric). (Figure A, page 1)
Follow the online steps to activate
your device. Click the “Activate”
link at the top of the page as
shown (Figure 2) to get started.
File Edit View History
www.blueangelpumps.com/AdvancedText
Figure 2
Single white wire
connects on left
Dual red and black
wires connect on right
Mounting
straps
