Glue the end caps on
–
the cap with only 4 holes goes
at the end with the long lugs (which will protrude
through it)
The larger end cap goes at the other end.
Glue this assembly on top of the base as shown, using
the lugs to position it.
Attach the other wall sections - making sure all the
wall sections are the same way round.
Take the upper windows, a support and a cap from
the sprue.
Glue the four window pieces with lugs to the
support.
Attach the “cap”
Then glue the other window pieces into place.
Glue this sub-assembly into position.
Take the eight balustrade pieces…