background image

NOTE:  

For your protection, please note that equipment in 

this shipment was carefully inspected and packaged by 
skilled personnel before leaving the factory.  Upon accep-
tance of this shipment, the transportation company assumes 
full responsibility for its safe delivery.

 

IF SHIPMENT ARRIVES DAMAGED:

 

1.

VISIBLE LOSS OR DAMAGE:

    Be  certain  that  any 

visible  loss  or  damage  is  noted  on  the  freight  bill  
or express receipt, and that the note of loss or damage 
is signed by the delivery person. 

2.

FILE CLAIM FOR DAMAGE IMMEDIATELY: 

 

         Regardless of the extent of the damage. 

3.

CONCEALED LOSS OR DAMAGE: 

 if damage is 

        unnoticed until the merchandise is unpacked, notify the           
        transportation company or carrier immediately, and file    
        “CONCEALED DAMAGE” claim with them.  This 
        must be done within fifteen (15) days from the date the  
         delivery was made to you.  Be sure to retain the 
         container for inspection. 

 

Bloomfield Industries cannot assume liability for damage or 
loss incurred in transit.  We will, however, at your request, 
supply you with the necessary documents to support your 
claim. 

WARRANTY STATEMENT 

SERVICE POLICY AND PROCEDURE GUIDE 

ADDITIONAL WARRANTY EXCLUSIONS 

SHIPPING DAMAGE CLAIMS PROCEDURE 

All   electrical   equipment   manufactured   by   BLOOMFIELD 
INDUSTRIES is warranted against defects in material and 
workmanship for a period of one year from original purchase 
or  eighteen  months  from  the  date  of  shipment  from  our 
factory, whichever comes first, and is for the benefit of the 
original  purchaser,  except that;   airpots  carry  a 30  day 
warranty only;  dispensers i.e. tea and coffee carry a 90 day 
warranty; and, decanters are excluded. 
 
THIS   WARRANTY   IS   THE   COMPLETE   AND   ONLY 
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN 
FACT, INCLUDING, BUT NOT LIMITED TO, WARRANTIES 
OF MERCHANTABILITY OR FITNESS FOR ANY PARTICU-
LAR PURPOSE, AND/OR INDIRECT OR CONSEQUENTIAL 
DAMAGES    IN    CONNECTION    WITH    BLOOMFIELD 
PRODUCTS.  
 
This warranty is void if it is determined upon inspection by an 
Authorized Service Agency that the equipment has been 
modified,  misused,  misapplied,  improperly  installed, or 
damaged in transit or by fire, flood or act of God. 
 
It  also  does  not  apply  if  the  serial  nameplate  has  been 
removed or service  is performed  by unauthorized  personnel. 

The prices charged by Bloomfield Industries for its products 
are based upon the limitations in this warranty.  Seller’s obli-
gation under this warranty is limited to repair of defects with-
out charge by a Bloomfield Industries Authorized Service 
Agency  or  one  of  its  sub-agencies.  This  service  will  be 
provided on customer’s premises for non-portable models.  
Portable models (a device with a cord and plug) must be 
taken or shipped to the closest Authorized Service Agency, 
transportation charges prepaid for service. 
 
In addition to restrictions contained in this warranty, specific 
limitations  are  detailed  in  the  

ADDITIONAL  WARRANTY 

EXCLUSIONS

 section.  Bloomfield  Industries  Authorized 

Service Agencies are located in principal cities. 
 
This warranty is valid in the United States and void elsewhere.  
Please consult your classified telephone directory, your food 
service equipment dealer, or, for information and other details 
concerning warranty write to: 
Service Parts Department 
Bloomfield Industries 
P. O. Box 280 
Verdi, Nevada  89439 

(775) 345-0444

   fax (775) 345-0569 

1.     Resetting   of  safety  thermostats,  circuit breakers,  
overload protectors, or fuse replacements unless warranted 
conditions are the cause. 

 

2.

All problems due to operation at voltages other than 

specified on equipment nameplates—conversion to correct 
voltage must be the customer’s responsibility. 

 

3.     All problems due to electrical connections not made in 
accordance  with  electrical  code  requirements  and  wiring 
diagrams supplied with the equipment. 

 

4.     Replacement of items subject to normal wear, to include 
such items as knobs and light bulbs.  Normal maintenance 
functions including adjustment of thermostats, microswitches, 
and replacement of fuses and indicating lights are not covered 
under warranty. 

 

5.     All problems due to inadequate water supply, such as 
fluctuating, or high or low water pressure. 

 

6.     All problems due to mineral/calcium deposits, or contamination 
from chlorides/chlorines.  De-liming is considered a preventative 
maintenance function and is not covered by warranty. 

7.     Full use, care and maintenance instructions are supplied 
with each machine.  Those miscellaneous adjustments noted 
are customer responsibility.  Proper attention will prolong the 
life of the machine. 

 

8.     Travel  mileage is limited to  sixty (60)  miles from an 
authorized Service Agency or one of its sub-agencies. 

 

9.     All labor shall be performed during normal working hours.  
Overtime premium shall be charged to the customer. 

 

10.   All genuine Bloomfield replacement parts are warranted for 
ninety (90) days from date of purchase on non-warranted equipment.  

Any use of non-genuine Bloomfield parts completely 
voids any warranty

 

11.   Installation, labor and job check-out are not considered 
warranty. 

 

12.   Charges incurred by delays, waiting time or operating 
restrictions  that  hinder  the  service  technicians  ability  to  perform 
services  are  not  covered  by  warranty.  This  includes  institutional 
and correctional facilities. 

xi 

Содержание 9421 (SS2-HE)





























Отзывы: