16
HDE-8C-QAM
Instruction Manual
Section 6 - Configuring the Unit
6.1 Accessing the Unit Via the Web Browser
You must complete the steps described in Section 4 before proceeding as follows:
(1) Open a web browser on your computer (Internet Explorer 7 or higher is recommended) and enter the following URL
address
(http://172.16.70.1)
. The "Login" Screen (Figure 6.1) will appear.
Figure 6.1 - "Login" Screen
(2) Enter the following case-sensitive factory-default Username and Password, and click on the "Submit" button.
NOTE:
When logged in as Admin, the user has read and write permission. Only one Admin can be logged in
at a time. When logged in as Guest, the user has only read permission. Up to four Guests can be logged in
simultaneously.
Username =
Admin
(case-sensitive)
Password =
pass
(case-sensitive)
- OR -
Username =
Guest
(case-sensitive)
Password =
pass
(case-sensitive)
Monitoring and configuration of the unit is achieved via a series of web pages described in following sections. The following
read-only information is displayed in a “page header” – in blue color – on top of each web page:
ESN:
unit’s Serial number
Headend name:
a user-defined field to make identification easier
Temperature:
temperature of unit’s chipset
Uptime:
time elapsed since last time the unit was turned on
Location:
a user-defined field to make identification easier
As shown in Figure 6.2, under the blue “page header” the following Primary tabs will appear:
• Primary tab
“Main”
includes the following sub-tabs: Status, Inputs, Encoder, Output, and Refresh.
• Primary tab
“Network”
doesn’t include any sub-tab.
• Primary tab
“Time”
doesn’t include any sub-tab.
• Primary tab
“Event Log”
doesn’t include any sub-tab.
• Primary tab
“Logout”
doesn’t include any sub-tab.
Each Primary and sub-tab is described in the subsequent Sections.
Содержание HDE-8C-QAM w/Opt 2
Страница 42: ...42 HDE 8C QAM Instruction Manual NOTES ...
