manualshive.com logo in svg

Blonder tongue HDE-8C-QAM w/Opt 2, Руководство пользователя

Поделиться
Скачать
Blonder tongue HDE-8C-QAM w/Opt 2 Скачать руководство пользователя страница 10

10

HDE-8C-QAM 

Instruction Manual

Section 3 – Installation & Power-up

3.1 Unpacking

You will find the following items in the box:
• HDE-8C-QAM Encoder (QTY=1)
• Power Cord with IEC C13 line socket and 3-pin Type B NEMA 5 plug (QTY=1)
• A hardware bag (item 741021800) containing one (1) 7' crossover RJ45 Ethernet cable:
•A hardware bag (item 741022600) containing (10) receiver labels.

3.2 Installation

The HDE-8C-QAM encoder is designed to be installed in a standard 19-inch (483 mm) rack (EIA 310-D, IEC 60297, and
DIN 41494 SC48D).
To install the encoder, secure the unit’s front panel to the rack by inserting four (4) machine screws, with cup washers, 

through the four (4) mounting holes in the front panel.

3.3 Power-up

Connect the line cord to a 110/230 VAC, 60/50 Hz outlet. Please note that the IEC power connector on the rear panel of the 

unit is equipped with an ON/OFF switch and a fuse (SLO-BLO, 4.0 Amp, 250V).
The “POWER” LED on the front-panel will light green.

FOR SAFE AND RELIABLE OPERATION, THE GROUND PIN OF THE POWER CORD PLUG 

MUST BE GROUNDED PROPERLY.

Содержание HDE-8C-QAM w/Opt 2













































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды