Blonder tongue 6522B-4-64 Скачать руководство пользователя страница 25

Страница: 25 / 48

EQAM-420B

User Manual

The RF Channel number will be displayed on TV only if the source stream does not carry any virtual

channel number.

RF Module #:

must select the Quad-QAM output RF module number 1, 2, 3 or 4.

Output Channel/Frequency: must assign an RF channel number to the first RF QAM output of the Quad-QAM module

(i.e. RF channel 50, as shown in Figure 6.4.1). The remaining three RF QAM channels will be automatically assigned to

the next adjacent channels (i.e. RF channels 51, 52 and 53). The range is NTSC channels 2 to 155.

Output Control: allows the user to turn each of the RF channels On/Off.

CW Control:

allows the user to switch the QAM output mode to CW (Continuous Waveform) which activates an analog

carrier at the selected channel’s center frequency; this is typically used in frequency alignment of the system.

Final Output Level:

allows the user to select the QAM RF output level for the combined output. The range is 28 to 41

dBmV. It is recommended to maintain the output level at 40 dBmV for normal operation.

Output QAM Mode: allows the user to select the desired QAM modulation mode. Possible options are: 64B, 256B,

16A, 32A, 64A, 128A, and 256A. For most applications in the USA, the recommended QAM modulation mode is 256B

– it allows four HD programs, not to exceed 38.8 Mbps, per RF QAM channel.

Output QAM Map: allows the user to select the desired QAM Map. Possible options are STD, IRC, and HRC.

Output QAM Data Rate: indicates the maximum data rate depending on the selected QAM mode, for example

5.360500 Mbaud for QAM 256B.

Output QAM Interleaver:

indicates the interleaver value for the selected QAM mode.

Output QAM Alpha:

indicates the Alpha value for the selected QAM mode

QAM Lock Status:

indicates whether Quad-QAM module is working properly (locked) or not. The module may take a

few seconds to lock when QAM output parameters are changed.

Remember to click on the SAVE button to apply the new values/configurations.

Содержание 6522B-4-64

















































Результаты поиска

Содержание 6522B-4-64

Отзывы:

Похожие инструкции для 6522B-4-64

Бренды по названию

Популярные бренды

Blonder tongue 6522B-4-64, Руководство пользователя

Результаты поиска

Содержание 6522B-4-64

Отзывы:

Похожие инструкции для 6522B-4-64

Бренды по названию

Популярные бренды