27
HDE-8C DIN Series
Instruction Manual
Encapsulation:
user must select the protocol that matches the protocol used by the receiving equipment. Options are:
“RTP” and “UDP”. (Factory Default: “UDP”)
Destination Port:
user must enter the IP Port of the receiving equipment. The range is 1 to 65535. The port number
assigned to each TS must be unique. (Factory Default: “50000”)
Source Port:
user must enter the IP Port of the equipment that the input IP source is streamed from. The range is 1 to
65535. The port number assigned to each TS must be unique. (Factory Default: “50000”)
NOTE:
Port number is recommended to be from 49152 to 65535. Reason: Ports 1-1023 are reserved and 1024-
49151 are registered ports.
Time to Live:
is limit to the amount of time an IP packet can exist in an IP network. The value is set by the sender of the
packet, and reduced by every host on the route to packet’s final destination. If the Time to Live reaches zero before the
packet arrives at its final destination, then the packet is discarded. The purpose of this field is to avoid an undeliverable
packet from circulating on an IP network perpetually. The range is 1 to 255. (Factory Default: “128”)
Stuffing:
Null packets are inserted to ensure that the TS bitrate assigned in of
remains constant.
Options are: “Enable” and “Disable”. It is advisable to Disable stuffing when only GigE output is used to help reduce the
traffic on the network.
Output Enable:
Allows user to “Enable” or “Disable” the IP output.
Destination IP:
allows user to assign the IP address of the equipment to which the GigE output is streamed to.
6.6.3 “Main > Output > IP” Screen (QAM/IP Model Only)
The “Main > Output > IP” screen (
) is a “user-configurable” screen to assign IP parameters to the TS:
2
2
3
4
6
7
1
5
Figure 6.6.3 - “Main > Output > IP” Screen
1
2
3
4
5
6
7
Remember to click on the SAVE button to apply the new values/configurations.
The Destination IP Address must be present before streaming occurs, otherwise the session is aborted. For Multicast
applications, the IP address must be in the range 224.0.0.0 through 239.255.255.255. For Unicast applications, the IP
address must be outside the above mentioned range.
Содержание 6371 Q
Страница 37: ...37 HDE 8C DIN Series Instruction Manual ...
Страница 38: ...38 HDE 8C DIN Series Instruction Manual NOTES ...
