manualshive.com logo in svg

Blonder tongue 6371 Q, Руководство пользователя, Страница: 35 / 40

Поделиться
Скачать
Blonder tongue 6371 Q Скачать руководство пользователя страница 35

35

HDE-8C DIN Series

Instruction Manual

Appendix A: Updating the Software Remotely

General background:

There are two different PROMs that need to be programmed in the Unit. They are called PROM1 and PROM2. Please note 

not every software update requires both PROMs to be programmed. However, program both PROMs unless you get a 

written notice with Release notes to do otherwise.

The total procedure takes about 10 minutes if you follow the steps below. 

Step 1: FTP two files from your PC to the Unit. 
Step 2: a) Update PROM1 with the specific command line. 

b) Update PROM2 with the specific command line.  

Step 1 : FTP Two Files to the Unit:

FTP both files (EPCS_1_ver#.bin and EPCS_2_ver#.bin) into the Unit's server board (there are many ways to do this). 

NOTE: 

a) The EPCS_1_ver#.bin is to program PROM1 and EPCS_2_ver#.bin is to program PROM2.
b) All the commands are case sensitive
c) It is recommended to copy the EPCS_1_ver#.bin and EPCS_2_ver#.bin files in the root

 

    directory. i.e, My Computer > C:
d) Only entering the command prompt, if you see a directory different than the root

    directory shown in 

Figure A-1

, then use the command “cd..” to enter the C:\>.

From a command (DOS) prompt (you must be in the same folder as the EPCS files) enter:

ftp –A 172.16.70.1

At the FTP prompt enter the following commands:

{Please ensure that you have entered the “bin” command to confirm that you are FTPing the files as binary files.}

bin
put EPCS_1_ver#.bin
put EPCS_2_ver#.bin
bye

The above four commands may be automated by entering them in an ASCII text file (called ftpcmd, recommended but can 

be any name) and executing the following:

ftp -A -s:ftpcmd 172.16.70.1

You can place the ftp command above in a batch file (.bat) then double click on the .bat file to perform the entire download 

process.

Figure A-1

Содержание 6371 Q









































Отзывы:

Нет отзывов