Blohm + Voss Oil Tools 9PU-7200, Техническая документация инструкция

Страница: 2 / 37

2
Manufacturer & Agents World Wide
Warnings and Notes
WARNING: A “WARNING”
INDICATES A DEFINITE
RISK OF EQUIPMENT
DAMAGE OR DANGER TO
PERSONNEL. FAILURE TO
OBSERVE AND FOLLOW
PROPER PROCEDURES
COULD RESULT IN SERIOUS
OR FATAL INJURY TO
PERSONNEL, SIGNIFICANT
PROPERTY LOSS, OR
SIGNIFICANT EQUIPMENT
DAMAGE.
NOTE: A “ NOTE ” indicates
that additional information is
provided about the current
topics.
Intended use of this
manual
WARNING: THIS TECHNICAL
DOCUMENTATION CONTAINS
INSTRUCTIONS ON SAFETY,
INSTALLATION, OPERATION
AND MAINTENANCE. IT
MUST BE STUDIED BEFORE
WORKING WITH THE TOOL.
This manual is intended
for use by field service,
engineering, installation,
operation, and repair
personnel. Every effort has
been made to ensure the
accuracy of the information
contained herein. Blohm
+ Voss Oil Tools, LLC, will
not be held liable for errors
in this material, or for
consequences arising from
misuse of this material.
Anyone using service
procedures or tools, whether
or not recommended by
Blohm + Voss Oil Tools,
LLC, must be satisfied that
neither personal safety nor
equipment safety will be
jeopardized.
Intellectual property
All rights retained. No part
of this document may be
reproduced in any form
(print, photocopy, microfilm
or any other procedure)
or be processed using an
electronic system without
written approval of Blohm +
Voss Oil Tools, LLC
All information contained
in this manual is based
upon the latest product
information available at the
time of printing.
Dependent on ongoing
technical improvements
(ISO 9001) “Blohm + Voss
Oil Tools, LLC” reserves the
right to change the design
and specifications without
announcement.
The values specified in
this manual represent the
nominal values of a unit
produced in series. Slight
deviations in the case of
the individual devices are
possible.
Limited Warranty
The warranty provided will
be void if the GraySpin HPU
is:
1. Repaired or serviced by
a service facility which
was not authorized by
Blohm + Voss Oil Tools,
LLC.
2. Replacement parts not
manufactured by Blohm
+ Voss Oil Tools, LLC are
used.
3. Modifications were made
to the FloorHand which
were not approved by
Blohm + Voss Oil Tools,
LLC.
General remarks
As with all rig equipment,
the GraySpin HPU must be
operated in accordance
with accepted rig safety
practices and procedures. All
operators should be familiar
with all safety precautions
and recommended
installation and operating
procedures, including the
information provided in this
manual and any other safety
publications by Blohm +
Voss Oil Tools, LLC Listed
on the next page are safety
considerations and warnings
found throughout this
manual.
NOTE: In the event of
problems that cannot be
solved with the aid of this
manual, please contact
one of the addresses listed
below.
Blohm + Voss Oil Tools
Hermann-Blohm-Straße 2
20457 Hamburg, Germany
Phone: +49(0)40/3119-1826/1162
Fax: +49(0)40/3119-8194
oiltools@blohmvoss.com
www.blohmvoss-oiltools.com
Premier Sea & Land Pte. Ltd.
Shaw Centre
1, Scotts Road #19-12
228208 Singapore
Republic of Singapore
Phone: +65-6734-7177
Fax: +65-6734-9115
enquiries@ mtq premier.com.sg
Blohm + Voss Oil Tools, LLC
7670 Woodway, Suite 266 Houston, Texas
77063
United States of America
Phone: +1-713-952-0266
Fax: +1-713-952-2807
BVOT@blohmvoss.com
www.blohmvoss-oiltools.com