4
Installation
Oven Assembly
STAND ASSEMBLY
1. Place stand frame upside down on a work surface.
2. Attach one leg to each of the corner stud bolts on the
bottom of the stand top.
3. Place a lock washer and nut on each bolt and tighten.
DO NOT tighten leg bolts completely.
4. Place the shelf between the legs so that the smooth
top surface is facing the top of the stand.
5. Align the shelf holes with the bolt holes found near
the bottom of each leg.
6. Insert a carriage bolt from the outside of the leg,
through the leg, and through the shelf corner bracket.
7. Place a lock washer and nut on each bolt, and tighten
securely.
8. Tighten the leg frame bolts.
9. Snap the casters into the legs of the stand. Secure by
tightening the locknut.
NOTE: The locking casters must be installed on the
front of the stand.
Figure 1
Attach the legs to
the stand frame
Shelf
Top of
Stand
See View A
Bottom View
Attach the shelf to the stand
View A
Attach the casters to the legs