Blodgett CTB XCEL Скачать руководство пользователя страница 8 | Manualshive

Страница: 8 / 29

Blodgett CTB XCEL Скачать руководство пользователя страница 8

6

Installation

oven assembly

oven asseMbLY to stanD
single section

1. Place the assembled stand in the location where the

oven is going to be used.

2. Remove the side control compartment cover and

open the front control panel of a single oven (or lower

section).

3. With a tool, punch out the knock-outs in the oven bot-

tom near each corner.

4. Set the oven on the stand. Center it to the frame.
5. Align the front, and rear bolt holes of the oven with the

bolt holes in the stand.

6. Insert a bolt and washer, from the top down through

each of the 2 holes.

7. Place a nut and washer on each of the 2 bolts, and

tighten securely.

8. Replace the oven’s side control compartment, and

close the front control panel.

NOTE: For single section ovens only. For double

stacked ovens step 8 will be completed

once the ovens are stacked.

figure 3

Double section

1. Assemble the lower section to the stand as described.

DO NOT replace the side control compartment or

close the front control panel.

2. With a tool, punch out the knock-outs in the oven top

of the lower oven.

3. Remove the side control compartment cover and

open the front control panel of the upper oven.

4. With a tool, punch out the knock-outs in the bottom of

the upper oven near each corner.

5. Set the upper oven on the lower oven.
6. Align the front, and rear bolt holes of the upper oven

with the bolt holes in the bottom oven.

7. Insert a bolt and washer, from the top down through

each of the 2 holes.

8. Place a nut and washer on each of the 2 bolts, and

tighten securely.

9. Replace the control compartment cover, and close

the front control panel on both of the ovens.

figure 4

«
...
6
7
8
9
10
...
»

Содержание CTB XCEL






























Отзывы:

Нет отзывов