Blodgett CTB XCEL Скачать руководство пользователя страница 6 | Manualshive

Страница: 6 / 29

Blodgett CTB XCEL Скачать руководство пользователя страница 6

4

Installation

stand assembly

stanD oPtions

Small Stands Without Shelves
• The 5-3/4” (15cm) stand is used for a single oven,

when short legs are required for countertop use.

• The 7” (18cm) stand is used for a double stacked

oven, when the oven is to be located on the floor.

stands With shelves

• Three stands, 16” (40cm), 19” (48cm), and 24”

(61cm) are available for different installation require-

ments.

• The 33” (84cm) stand is used for a single oven when

counter space is limited.

open stands With Racks

• The 33” (84cm) open stands are available with a

rack support system located below the oven.

stanD asseMbLY
small stands Without shelves

1. Place stand frame upside down on a work surface.
2. Attach one leg to each of the corner stud bolts on the

bottom of the stand top.

3. Place a lock washer and nut on each stud, and tight-

en securely.

4. The stand is now ready for the oven assembly.

stands With shelves

1. Place stand frame upside down on a work surface.
2. Attach one leg to each of the corner stud bolts on the

bottom of the stand top.

3. Place a lock washer and nut on each bolt, and tight-

en. DO NOT tighten leg bolts completely.

4. Place the shelf between the legs so that the smooth

top surface is facing the top of the stand.

5. Align the shelf holes with the bolt holes found near

the bottom of each leg.

6. Insert a carriage bolt from the outside of the leg,

through the leg, and through the shelf corner bracket.

7. Place a lock washer and nut on each bolt, and tighten

securely.

8. Tighten the leg frame bolts.

figure 1

«
...
4
5
6
7
8
...
»

Содержание CTB XCEL






























Отзывы:

Нет отзывов