manualshive.com logo in svg

Blodgett CTB XCEL, Установка, эксплуатация и обслуживание, Страница: 7 / 29

Поделиться
Скачать
Blodgett CTB XCEL Скачать руководство пользователя страница 7

5

Installation

stand assembly

figure 2 

open stands With shelves and Racks

1.  Place stand frame upside down on a work surface.
2.  Attach one leg to each of the corner stud bolts on the 

bottom of the stand top.

3.  Place a lock washer and nut on each bolt, and tight-

en. DO NOT tighten leg bolts completely.

4.  Attach the rack support angles to the stud bolts on the 

bottom of the stand top with the nuts provided.

Each support angle has 2 clips on one end and 1 clip 

on the other end. The two clips should be at the back 

of the stand facing toward the center.

iMPoRtant - be sure the support angles and 

clips are located correctly for your oven configu

-

ration as shown.

5.  Position the bottom shelf between the legs so that the 

smooth top surface is facing the top of the stand.

6.  Align the shelf holes with the bolt holes found near 

the bottom of each leg.

7.  Insert a carriage bolt from the outside of the leg, 

through the leg, and through the shelf corner bracket.

8.  Place a lock washer and nut on each bolt, and tighten 

securely.

9.  Repeat Steps 5-8 for the top shelf.

NOTE:  Be sure the slots in the top shelf are aligned 

with the support angles.

10. Insert the top of the rack stops into the two back clips 

on the angle supports as shown. Insert the bottom of 

the rack stops into the slots in the top shelf as shown.

11.  Insert the rack supports into the remaining four clips 

on the angle supports as shown. Insert the bottom 

of the rack supports into the slots in the top shelf as 

shown.

12. Tighten all loose bolts.

ctb - Underside of stand top

Left 

Support 

Angle

Right 

Support 

Angle

Top Shelf 

(rear)

Support Angle

Rack 

Support

Attach Rack Supports 

and Rack Stops

Clips

Rack Stop

Clips

ctbR - Underside of stand top

Clips

Left 

Support 

Angle

Right 

Support 

Angle

Proper Location of Support Angles

Rear of 

Stand

Rear of 

Stand

Содержание CTB XCEL






























Отзывы:

Нет отзывов