Blitz GH Series, Инструкция по эксплуатации и список запасных частей

Страница: 16 / 44

Operating Instructions for Suspended Jacks
16
7 Maintenance and Repair
WARNING
Risk of injury and material damage
 Perform maintenance and repair of the lift always without a load.
Safety notes

Maintenance and repair work on the jack may be performed only by specialists.
 Disconnect the jack from the compressed air supply or from the electrical mains before carrying
out any maintenance and repair work.

After maintenance and repair work on the hydraulic system, the system must be vented.

Always retighten screwed connections loosened during maintenance and repair work.

Do not clean the jack with a high-pressure or steam jet.
 As there is a high risk of slipping on an oily workshop floor, always catch oil in a suitable
container and dispose of it correctly.

When handling oil, grease, and chemical substances, the safety regulations for the product must
be observed.

Do not use aggressive cleaning agents to clean the lift.
 Use only original spare parts of the manufacturer (

11) and approved supplies (

7.7).
 Pay attention to safe and environment-friendly disposal of lubricants and auxiliary materials (e.g.
hydraulic oil) and replaced parts.
7.1 Maintenance Intervals
Lifts in continuous operation or in especially contaminated surroundings shall be serviced more
frequently.
Weekly
 Perform function test. (

7.2)

Check compressed air supply. (

7.3)

Top up anti-rust oil. (

7.4)

Check the hydraulic oil level. (

7.5)
 Check connection cables/hoses for damage and abrasion.
 Lubricate castors.

Clean the jack and apply rust preventives.
Annually
 Perform the safety test. (

7.6)

Change the hydraulic oil. (

7.7)

Clean and grease the bearings of all castors.

Check track width of the transversely adjustable undercarriage (

4.2)
 Check screw connections of the undercarriage and tighten, if necessary (

4.2)
Every 5 years

Replace hydraulic hoses. (

7.8)
7.2 Perform Function Test

Test the full functionality of the jack without load.

Test the full functionality of the jack with load.
 In case of a malfunction, stop the lift immediately and secure it. Have any faults repaired
immediately, and insure problem-free operation.
7.3 Check Compressed Air Supply

Check and maintain the filter and water separator according to the manufacturer’s instructions.

Check supply pressure. (

4.3)
H P