BLiNQ X-1200, Руководство по установке

Страница: 19 / 65

BLiNQ Networks Inc. X-1200 System Installation Guide Release 1.0
Confidential - Restricted Use and Duplication Page 13 Issue 01 D1
6 Installing the Modules (General)
As needed, refer to these sections and follow these steps to properly install either the Hub Module (HM)
or Remote Backhaul module (RBM):

Section 6.1, “ General Safety Information ”, page 13

Section 6.2, “ Equipment Distance and Orientation ”, page 14

Section 6.3, “ Mounting to a Pole or Wall ”, page 14

Section 6.3.1, “ Attaching Pole Clamps to Mounting Bracket ”, page 16

Section 6.3.2, “ Mounting with U- or V-Clamps ”, page 17

Section 6.3.3, “ Mounting with Steel Straps ”, page 17

Section 6.3.4, “ Mounting onto a Wall ”, page 18

Section 6.4, “ Assembling the Module Brackets ”, page 19

Section 6.4.1, “ Attach Elevation Bracket ”, page 19

Section 6.4.2, “ Attach Azimuth Bracket ”, page 21

Section 6.5, “ Installing the Power Supply Unit (Optional) ”, page 23

Section 6.6, “ Installing the Module onto a Mounting Bracket ”, page 26

Section 6.7, “ Grounding and Overvoltage Protection Instructions ”, page 28

Section 6.8, “ Connecting to DC Power ”, page 31

Section 6.9, “ Verifying Basic Installation ”, page 33

Section 6.10, “ Connecting to the Ethernet Backhaul Network ”, page 34

Section 6.11, “ Cable Management ”, Page 36
6.1 General Safety Information
Before performing any of the tasks in this chapter, read the safety warnings and service notices in
Chapter 1, “
Important Safety and Service Notices ”.
The system requires one person to properly and safely install the X-1200 system modules.
WARNING!

Installation of the equipment must comply with local and national
electrical codes.

Personnel mounting the equipment must understand grounding
methods.
!