Blink WE-30C, Руководство пользователя

Страница: 54 / 63

50
OM0001_L2_R_WM_USAv2.1
Self-test fault
Your Blink charging system runs a self-test when a vehicle is connected to make sure its ground fault
protection is working properly. If this self-test fails, the screen below appears and an intermittent beep
indicates that a self-test fault has occurred. This beep stops once the system is either manually reset or
resets automatically. In most cases, simply touching the screen to reset the system resolves the
problem. However, if you see this screen again, please contact a Blink Contact Center service
representative.
Critical error
Most users will never see this screen. Following
the screen’s instructions to turn off the power to your
Blink charging system then turn it back on usually will resolve the problem. If not, please contact a Blink
Contact Center service representative.
Touch the screen to reset
your Blink charging system.
If you see this screen again,
please contact a Blink
service representative.